http://www.woodpelletmachinery.com
Home > Products > Wood Pellet Machine > Biomass Pellet Machine > Brazil Pellet Production Using Biomass Pellet Machine

Brazil Pellet Production Using Biomass Pellet Machine

    Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union
    Incoterm: FOB,CFR,CIF
    Min. Order: 1 Set/Sets
Basic Info

Model No.YGKJ560-B

BrandROTEXMASTER

CertificationISO

ColorCustomized

Lubrication SystemAutomatic Lubrication System

TypeVertical Ring Die Pellet Machine

Die MaterialStainless Steel

VoltageThree Phase

ReductionNew Designed Gearbox

Factory VisitSincerely Welcome

Machine Weight5.8 Ton

Machine Die Diameter560 Mm

Additional Info

PackagingSeaworthy standard packing

Productivity1-1.5 t/h

TransportationOcean,Land

Place of OriginChina

Supply Ability1000 sets per year

CertificateISO-9001; CE

HS Code8479300000

PortQingdao,Ningbo,Tianjin

Payment TypeL/C,T/T,D/P,Paypal,Money Gram,Western Union

IncotermFOB,CFR,CIF

Product Description

The Introduction of Biomass Pellet Machine:

The Biomass Pellet Machine is suitable for hardwood , pine, poplar, birch , eucalyptus , rice husk , peanut shell  crop straw and other materials to press pellets .

The Biomass Pellet Machine advantages has strong power output, high stability, low maintenance costs.etc .

[ROTEX MASTER] YGKJ Series Biomass Pellet Machinee is a professional equipment for producing biomass fuel pellets.
The pellets size 6mm,8mm,10mm or 12mm,meeting different customer requirements.
ROTEX biomass pellet machine could compress all kinds of biomass raw materials into pellets,such as wood logs,wood chips ,wood sawdust,EFB fiber,straw stalk,grass,oilve waste,sago waste etc.,formation rate more than 98%.

For making biomass pellets,the customer has to consider three important factors:
1.Whether we have enough raw materials supply?
2.Wether our factory is bigger enough? Because the whole factory need to place raw materials area,biomass pellet plant area and finished pellets area etc.
3.Wether our electric transformer is ok? The complete biomass pellet project need 3 phase,please kindly note it.
The following is [ROTEX MASTER] Wood Pellet Machine and its quick-change parts features description for your reference.



Biomass Pellet Machine Technical Parameters: 

Model YGKJ560-B YGKJ700 YGKJ880
Power(kw) 90/110 kw 132/160 kw 220 kw
Capacity(t/h) 1.5 t/h 2-3 t/h 3-4 t/h
Pellet diameter(mm) 6/8/10 mm  6/8/10 mm 6/8/10 mm
Measurement(mm) 2200*1300*1600 mm 2400*1400*1800 mm 3000*1500*2300 mm
Weight(ton) 5.8 t 8 t 12 t
Dust collecting system cyclone, bag dust collector, fan blower system 
Deceleration mode Gear level 3 drive
Gearbox weight

2.5 tons

Roller type

sealed roller without lock ,( 55247999,also called roller without grease)

Die material

Stainless steel

Die heat treatment hardness

HRC55-60

Die lifetime

1200-1500 hours

Advantages of Biomass Pellet Machine:

1. The motor and main shaft are parallel vertical installated.

That can reduce the energy of the transmission process ,more output power, energy efficiency more higher .

2. The gearbox adopts independent research and development big gear with 3 level drive.

Module increased , gear strengths increased , carring more power and more stable , the service life increased 8-10 times than the traditional reducer , service life greatly increase . 

The gears in gearbox quality assurance for five years!

3. Bearing room structure is smaller.

Make the whole structure compact; It guarantee the bearing room, pelleting room working steady. The hollow shaft connect directly with spline shaft in bearing room, guarantee high concentricity,reduce the failure rate of equipment.

4. The roller adopts a new type sealed roller without lock which is designed by ourselves.

(also called roller without grease). The roller has a good tightness,which reduce the oil and grease consumption. That extend the using life of roller bearing,reduce the cost for using and maintaining of roller.

5. The new design of die enlarge the discharge area, increase the capacity. 

It adopt the stainless steel die which use  integral carburation. Heat treatment hardness: HRC55-60.

The die have a high abrasion performance,strong stability,whose using life is about 1200h-1500h.

The enlarge design of discharge area increase the quantity of effective discharge hole,increasing the capacity,saving cost.

6.Oiling System

Reducer box and the main shaft bearing room adopt the circulating closed industrial gear oil lubrication, which makes the lubrication good effect and so that protect effectively the bearing life.

The shaft bearing room is lubricated with gear oil, which greatly reduces the cost of traditional grease lubrication and improve work efficiency .

7. Electric control system design, independent research and development mold temperature detection, bearing room temperature detection, oil temperature detection and other temperature detection system,

Reflect equipment core part temperature data real-time, making users know more about their equipment, avoiding equipment failure rate,

Mobile terminal control equipment operation, to achieve equipment intelligent management , reducing personnel cost.

Biomass Pellet Machine

Biomass Pellet Machines

wood Pellet Machines



Product Categories : Wood Pellet Machine > Biomass Pellet Machine

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Christine Ms. Christine
What can I do for you?
Contact Supplier